[ Sep  7 00:45:27 Enabled. ]
[ Sep  7 00:45:27 Rereading configuration. ]
[ Sep  7 00:45:27 Rereading configuration. ]
[ Sep  7 00:45:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.40212539Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.434314107Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.455927612Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.461715114Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.4743558Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.934626724Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:30.946657017Z","hostname":"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228","pid":27835,"zonename":"\"oxz_oximeter_1fc4663e-1af0-45bb-bf34-73d4580c9228\""}
[ Sep  7 00:45:30 Method "start" exited with status 0. ]