[ Sep  8 18:04:24 Enabled. ]
[ Sep  8 18:04:24 Rereading configuration. ]
[ Sep  8 18:04:25 Rereading configuration. ]
[ Sep  8 18:04:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:27.579071571Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:27.58989605Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:27.599739268Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:27.604873907Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:27.611784733Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:28.067864145Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T18:04:28.07759544Z","hostname":"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659","pid":24636,"zonename":"\"oxz_crucible_36de3a99-6b5b-4eb2-a526-e987c13da659\""}
[ Sep  8 18:04:28 Method "start" exited with status 0. ]