| 1 | | [ Sep 8 18:00:39 Enabled. ] |
| 2 | | [ Sep 8 18:00:39 Rereading configuration. ] |
| 3 | | [ Sep 8 18:00:40 Rereading configuration. ] |
| 4 | | [ Sep 8 18:00:40 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService3 -s fd00:1122:3344:1::1 -g fd00:1122:3344:1::2"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-08T18:00:40.874Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService3
|
| 7 | 2026-09-08T18:00:40.880Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService3
|
| 8 | 2026-09-08T18:00:40.890Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-08T18:00:40.895Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-08T18:00:40.899Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService3"
static address = fd00:1122:3344:1::1
|
| 11 | 2026-09-08T18:00:41.353Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:1::2
|
| 12 | 2026-09-08T18:00:41.361Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_internal_dns_c4191e1c-a8d1-461a-8412-89693d30d34c"
|
| 13 | | [ Sep 8 18:00:41 Method "start" exited with status 0. ] |