[ Sep  8 19:45:56 Enabled. ]
[ Sep  8 19:45:56 Rereading configuration. ]
[ Sep  8 19:45:57 Rereading configuration. ]
[ Sep  8 19:46:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:01.816597395Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:01.828700854Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:01.838209874Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:01.843488626Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:01.848521262Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:02.305388494Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-08T19:46:02.314089894Z","hostname":"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43","pid":29922,"zonename":"\"oxz_oximeter_0b56cbdf-5058-470b-ac8a-2ac489fc6d43\""}
[ Sep  8 19:46:02 Method "start" exited with status 0. ]