| 1 | | [ Sep 11 00:58:26 Enabled. ] |
| 2 | | [ Sep 11 00:58:26 Rereading configuration. ] |
| 3 | | [ Sep 11 00:58:30 Rereading configuration. ] |
| 4 | | [ Sep 11 00:58:35 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-11T00:58:35.231Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService19
|
| 7 | 2026-09-11T00:58:35.236Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService19
|
| 8 | 2026-09-11T00:58:35.243Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-11T00:58:35.248Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-11T00:58:35.250Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService19"
static address = fd00:1122:3344:101::13
|
| 11 | 2026-09-11T00:58:35.705Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-09-11T00:58:35.711Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_2746d6ef-292e-4182-8464-12c2ecc5779b"
|
| 13 | | [ Sep 11 00:58:35 Method "start" exited with status 0. ] |