[ Sep 11 20:11:33 Enabled. ]
[ Sep 11 20:11:33 Rereading configuration. ]
[ Sep 11 20:11:34 Rereading configuration. ]
[ Sep 11 20:11:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:37.727263025Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:37.742351991Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:37.756109113Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:37.761657948Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:37.767703037Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:38.225079814Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T20:11:38.233769412Z","hostname":"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222","pid":22410,"zonename":"\"oxz_oximeter_d7e4f754-4555-41bf-990e-74b68aa92222\""}
[ Sep 11 20:11:38 Method "start" exited with status 0. ]