[ Sep 11 22:12:28 Enabled. ]
[ Sep 11 22:12:28 Rereading configuration. ]
[ Sep 11 22:12:31 Rereading configuration. ]
[ Sep 11 22:12:35 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.187916315Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.196676456Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.208148283Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.213516116Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.218489832Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.678521979Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-11T22:12:35.688288947Z","hostname":"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6","pid":23220,"zonename":"\"oxz_crucible_1f44325a-7fa0-4c8d-a4e5-3d865cca7fa6\""}
[ Sep 11 22:12:35 Method "start" exited with status 0. ]