[ Sep 15 21:05:51 Enabled. ]
[ Sep 15 21:05:51 Rereading configuration. ]
[ Sep 15 21:05:53 Rereading configuration. ]
[ Sep 15 21:05:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:55.775708699Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:55.785535336Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:55.796181601Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:55.799794851Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:55.804165177Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:56.262336148Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-15T21:05:56.270651862Z","hostname":"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4","pid":23617,"zonename":"\"oxz_crucible_eeef318f-de7c-46db-b0b1-1b4205caa9f4\""}
[ Sep 15 21:05:56 Method "start" exited with status 0. ]