[ Sep 19 07:31:47 Enabled. ]
[ Sep 19 07:31:47 Rereading configuration. ]
[ Sep 19 07:31:49 Rereading configuration. ]
[ Sep 19 07:31:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:51.974190429Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:51.984825681Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:51.996479967Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:52.002700174Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:52.007047347Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:52.463213273Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-19T07:31:52.470460615Z","hostname":"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a","pid":23032,"zonename":"\"oxz_crucible_1aeb3ffe-6c13-4905-a2af-e02aaf627d9a\""}
[ Sep 19 07:31:52 Method "start" exited with status 0. ]