[ Oct 14 01:29:12 Enabled. ]
[ Oct 14 01:29:12 Rereading configuration. ]
[ Oct 14 01:29:15 Rereading configuration. ]
[ Oct 14 01:29:20 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:20.732459067Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:20.739185649Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:20.747552603Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:20.751425129Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:20.754901158Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:21.209322663Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-14T01:29:21.216160207Z","hostname":"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac","pid":25492,"zonename":"\"oxz_oximeter_8d8da3f6-db04-42ff-a326-153e08849cac\""}
[ Oct 14 01:29:21 Method "start" exited with status 0. ]