[ Oct 19 18:31:20 Enabled. ]
[ Oct 19 18:31:20 Rereading configuration. ]
[ Oct 19 18:31:21 Rereading configuration. ]
[ Oct 19 18:31:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.43538152Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.445157844Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.458425379Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.46299935Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.46702755Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.925318396Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-19T18:31:26.934300125Z","hostname":"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2","pid":29197,"zonename":"\"oxz_oximeter_0cf32ecd-fd96-488a-8061-e1fcdef926f2\""}
[ Oct 19 18:31:26 Method "start" exited with status 0. ]