[ Oct 22 19:58:47 Enabled. ]
[ Oct 22 19:58:47 Rereading configuration. ]
[ Oct 22 19:58:49 Rereading configuration. ]
[ Oct 22 19:58:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:53.797700343Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:53.808180788Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:53.818464962Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:53.824306579Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:53.829250488Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:54.285575989Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-22T19:58:54.293967097Z","hostname":"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e","pid":23380,"zonename":"\"oxz_oximeter_3b8c5739-1590-4676-96d1-7d822c39355e\""}
[ Oct 22 19:58:54 Method "start" exited with status 0. ]