| 1 | | [ Oct 22 19:56:37 Enabled. ] |
| 2 | | [ Oct 22 19:56:37 Rereading configuration. ] |
| 3 | | [ Oct 22 19:56:37 Rereading configuration. ] |
| 4 | | [ Oct 22 19:56:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService0 -s ::1 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-10-22T19:56:56.213Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService0
|
| 7 | 2026-10-22T19:56:58.201Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService0
|
| 8 | | zone-setup: failed to set MTU on datalink oxControlService0 |
| 9 | | |
| 10 | | Caused by: |
| 11 | | Command [/usr/sbin/ipadm set-ifprop -t -p mtu=9000 -m ipv4 oxControlService0] executed and failed with status: exit status: 1 stdout: |
| 12 | | stderr: ipadm: set-ifprop: mtu: Interface does not exist |
| 13 | | [ Oct 22 19:56:58 Method "start" exited with status 1. ] |
| 14 | | [ Oct 22 19:56:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService0 -s ::1 -g fd00:1122:3344:101::1"). ] |
| 15 | | note: configured to log to "/dev/stderr" |
| 16 | 2026-10-22T19:56:58.236Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService0
|
| 17 | 2026-10-22T19:56:58.239Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService0
|
| 18 | 2026-10-22T19:56:58.244Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 19 | 2026-10-22T19:56:58.246Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 20 | 2026-10-22T19:56:58.249Z | INFO | zone-setup: Static address is localhost; will not ensure it's set on the IP interface
|
| 21 | 2026-10-22T19:56:58.249Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 22 | 2026-10-22T19:56:58.253Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_switch"
|
| 23 | | [ Oct 22 19:56:58 Method "start" exited with status 0. ] |