[ Oct 23 15:45:44 Enabled. ]
[ Oct 23 15:45:44 Rereading configuration. ]
[ Oct 23 15:45:46 Rereading configuration. ]
[ Oct 23 15:45:49 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.266178281Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.276393703Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.290825344Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.295960526Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.30142048Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.759820467Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:45:49.768268261Z","hostname":"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79","pid":24136,"zonename":"\"oxz_oximeter_8aa44ebb-3c37-42cb-8f7c-b78afc219c79\""}
[ Oct 23 15:45:49 Method "start" exited with status 0. ]