[ Oct 23 15:44:40 Enabled. ]
[ Oct 23 15:44:40 Rereading configuration. ]
[ Oct 23 15:44:41 Rereading configuration. ]
[ Oct 23 15:44:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:41.734675164Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268,"datalink":"oxControlService4"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:41.73933392Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268,"datalink":"oxControlService4"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:41.744925618Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:41.747407046Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:41.750102571Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268,"static address":"fd00:1122:3344:101::1b","data link":"\"oxControlService4\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:42.203170294Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-23T15:44:42.207317811Z","hostname":"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604","pid":6268,"zonename":"\"oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604\""}
[ Oct 23 15:44:42 Method "start" exited with status 0. ]