| 1 | | [ Oct 23 15:44:40 Enabled. ] |
| 2 | | [ Oct 23 15:44:40 Rereading configuration. ] |
| 3 | | [ Oct 23 15:44:41 Rereading configuration. ] |
| 4 | | [ Oct 23 15:44:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-10-23T15:44:41.734Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-10-23T15:44:41.739Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-10-23T15:44:41.744Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-10-23T15:44:41.747Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-10-23T15:44:41.750Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-10-23T15:44:42.203Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-10-23T15:44:42.207Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_6a99ff65-a961-4d9f-ad5d-f8892a69b604"
|
| 13 | | [ Oct 23 15:44:42 Method "start" exited with status 0. ] |