[ Oct 27 18:22:30 Enabled. ]
[ Oct 27 18:22:30 Rereading configuration. ]
[ Oct 27 18:22:31 Rereading configuration. ]
[ Oct 27 18:22:34 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.664944586Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.678146586Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.691414157Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.696728722Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.703923947Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.160806774Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.168550087Z","hostname":"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051","pid":22367,"zonename":"\"oxz_crucible_37e99b0a-568d-4569-868a-f8dc6d4e7051\""}
[ Oct 27 18:22:35 Method "start" exited with status 0. ]