[ Oct 27 18:22:29 Enabled. ]
[ Oct 27 18:22:29 Rereading configuration. ]
[ Oct 27 18:22:32 Rereading configuration. ]
[ Oct 27 18:22:35 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService27 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.437549582Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786,"datalink":"oxControlService27"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.447087774Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786,"datalink":"oxControlService27"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.458508445Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.462703492Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.467255985Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService27\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.928508342Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.936005651Z","hostname":"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116","pid":22786,"zonename":"\"oxz_crucible_6a064a56-ca58-4a68-b239-ebc9187c1116\""}
[ Oct 27 18:22:35 Method "start" exited with status 0. ]