[ Oct 27 18:22:29 Enabled. ]
[ Oct 27 18:22:29 Rereading configuration. ]
[ Oct 27 18:22:31 Rereading configuration. ]
[ Oct 27 18:22:34 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.908028598Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.917407587Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.930419264Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.936260727Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.943492202Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.402802878Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:35.410597232Z","hostname":"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8","pid":22526,"zonename":"\"oxz_crucible_fc2e40f2-f57f-4803-ba18-13e2ccaf5fb8\""}
[ Oct 27 18:22:35 Method "start" exited with status 0. ]