[ Oct 27 18:22:30 Enabled. ]
[ Oct 27 18:22:30 Rereading configuration. ]
[ Oct 27 18:22:30 Rereading configuration. ]
[ Oct 27 18:22:34 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService24 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.227051231Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087,"datalink":"oxControlService24"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.23954505Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087,"datalink":"oxControlService24"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.253443811Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.258327469Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.266785634Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService24\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.732052905Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-27T18:22:34.742193526Z","hostname":"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02","pid":22087,"zonename":"\"oxz_oximeter_2ff54067-1d51-4bff-b725-16400323fd02\""}
[ Oct 27 18:22:34 Method "start" exited with status 0. ]