[ Oct 28 19:00:58 Enabled. ]
[ Oct 28 19:00:58 Rereading configuration. ]
[ Oct 28 19:00:59 Rereading configuration. ]
[ Oct 28 19:01:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.149468733Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.159287227Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.171287582Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.176649502Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.182377082Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.640479548Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-28T19:01:02.648648136Z","hostname":"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5","pid":24472,"zonename":"\"oxz_oximeter_2cb92cf0-1417-43cc-95d9-a9f4babdf0a5\""}
[ Oct 28 19:01:02 Method "start" exited with status 0. ]