[ Oct 29 02:38:20 Enabled. ]
[ Oct 29 02:38:20 Rereading configuration. ]
[ Oct 29 02:38:21 Rereading configuration. ]
[ Oct 29 02:38:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:24.979582271Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:24.989695651Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:25.003337245Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:25.009426342Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:25.014893015Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:25.471168539Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T02:38:25.480619185Z","hostname":"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450","pid":22986,"zonename":"\"oxz_crucible_8eb3d657-a46e-499e-8b7a-f4cdfc49a450\""}
[ Oct 29 02:38:25 Method "start" exited with status 0. ]