[ Oct 29 21:38:20 Enabled. ]
[ Oct 29 21:38:20 Rereading configuration. ]
[ Oct 29 21:38:22 Rereading configuration. ]
[ Oct 29 21:38:25 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:25.715818135Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:25.726706751Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:25.738218501Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:25.743314676Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:25.749751951Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:26.208659075Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-29T21:38:26.217397842Z","hostname":"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f","pid":24625,"zonename":"\"oxz_crucible_d2194a90-ef32-4d9c-8668-c81df1221f1f\""}
[ Oct 29 21:38:26 Method "start" exited with status 0. ]