[ Oct 30 18:15:18 Enabled. ]
[ Oct 30 18:15:18 Rereading configuration. ]
[ Oct 30 18:15:20 Rereading configuration. ]
[ Oct 30 18:15:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.934885518Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.945239447Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.955687319Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.961541208Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.96747735Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.423371425Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.43253268Z","hostname":"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43","pid":25443,"zonename":"\"oxz_crucible_1e08dd29-716d-4884-bc97-a828d1a03c43\""}
[ Oct 30 18:15:23 Method "start" exited with status 0. ]