[ Oct 30 18:15:18 Enabled. ]
[ Oct 30 18:15:18 Rereading configuration. ]
[ Oct 30 18:15:20 Rereading configuration. ]
[ Oct 30 18:15:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.659583981Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.670107925Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.679795845Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.686129268Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.692723789Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.150245132Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.158432028Z","hostname":"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e","pid":25321,"zonename":"\"oxz_crucible_446f72e5-daca-4c4d-a503-68f295315f3e\""}
[ Oct 30 18:15:23 Method "start" exited with status 0. ]