[ Oct 30 18:15:18 Enabled. ]
[ Oct 30 18:15:18 Rereading configuration. ]
[ Oct 30 18:15:20 Rereading configuration. ]
[ Oct 30 18:15:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.915340063Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438,"datalink":"oxControlService28"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.927111883Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438,"datalink":"oxControlService28"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.940261403Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.946292487Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:22.951710744Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService28\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.408210637Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:23.422717507Z","hostname":"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b","pid":25438,"zonename":"\"oxz_crucible_0fc042ed-4041-48b6-bcc7-0672c9ca958b\""}
[ Oct 30 18:15:23 Method "start" exited with status 0. ]