[ Oct 30 18:15:21 Enabled. ]
[ Oct 30 18:15:21 Rereading configuration. ]
[ Oct 30 18:15:23 Rereading configuration. ]
[ Oct 30 18:15:25 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService25 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.126818633Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739,"datalink":"oxControlService25"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.135923896Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739,"datalink":"oxControlService25"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.14504463Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.149401616Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.153731351Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService25\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.610750206Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-10-30T18:15:25.617558642Z","hostname":"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f","pid":26739,"zonename":"\"oxz_oximeter_8c79033e-585e-48f7-b751-ea1c3eb0e91f\""}
[ Oct 30 18:15:25 Method "start" exited with status 0. ]