[ Nov  2 17:12:20 Enabled. ]
[ Nov  2 17:12:20 Rereading configuration. ]
[ Nov  2 17:12:21 Rereading configuration. ]
[ Nov  2 17:12:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:24.873260576Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:24.885901937Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:24.897469583Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:24.904313146Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:24.910495846Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:25.368174177Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T17:12:25.378107725Z","hostname":"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b","pid":22083,"zonename":"\"oxz_oximeter_f754c5e9-c1a7-4d5e-8906-edf1bcae7c0b\""}
[ Nov  2 17:12:25 Method "start" exited with status 0. ]