[ Nov  2 21:46:14 Enabled. ]
[ Nov  2 21:46:14 Rereading configuration. ]
[ Nov  2 21:46:17 Rereading configuration. ]
[ Nov  2 21:46:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.116852157Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.122795413Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.128631916Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.131719477Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.134463068Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.587409211Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-02T21:46:23.592138081Z","hostname":"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0","pid":29478,"zonename":"\"oxz_oximeter_9a4fba9d-fbe5-4b64-bd41-8ed1818599b0\""}
[ Nov  2 21:46:23 Method "start" exited with status 0. ]