[ Nov  4 00:24:07 Enabled. ]
[ Nov  4 00:24:07 Rereading configuration. ]
[ Nov  4 00:24:08 Rereading configuration. ]
[ Nov  4 00:24:08 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:08.818337194Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461,"datalink":"oxControlService4"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:08.82298256Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461,"datalink":"oxControlService4"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:08.828008589Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:08.830615605Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:08.833309361Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461,"static address":"fd00:1122:3344:101::1b","data link":"\"oxControlService4\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:09.287730436Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T00:24:09.292395462Z","hostname":"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7","pid":6461,"zonename":"\"oxz_ntp_b63606c9-f338-455f-8ccd-e312c9b1d7d7\""}
[ Nov  4 00:24:09 Method "start" exited with status 0. ]