[ Nov  4 06:28:19 Enabled. ]
[ Nov  4 06:28:19 Rereading configuration. ]
[ Nov  4 06:28:20 Rereading configuration. ]
[ Nov  4 06:28:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.413682264Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703,"datalink":"oxControlService28"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.422575042Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703,"datalink":"oxControlService28"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.430409818Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.435893828Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.440544151Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService28\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.895165171Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-04T06:28:24.900441087Z","hostname":"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f","pid":23703,"zonename":"\"oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f\""}
[ Nov  4 06:28:24 Method "start" exited with status 0. ]