| 1 | | [ Nov 4 06:28:19 Enabled. ] |
| 2 | | [ Nov 4 06:28:19 Rereading configuration. ] |
| 3 | | [ Nov 4 06:28:20 Rereading configuration. ] |
| 4 | | [ Nov 4 06:28:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-11-04T06:28:24.413Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService28
|
| 7 | 2026-11-04T06:28:24.422Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService28
|
| 8 | 2026-11-04T06:28:24.430Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-11-04T06:28:24.435Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-11-04T06:28:24.440Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService28"
static address = fd00:1122:3344:101::18
|
| 11 | 2026-11-04T06:28:24.895Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-11-04T06:28:24.900Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_608f0cff-219d-4cb4-bb38-9b28f06a7c0f"
|
| 13 | | [ Nov 4 06:28:24 Method "start" exited with status 0. ] |