| 1 | | [ Nov 4 06:28:18 Enabled. ] |
| 2 | | [ Nov 4 06:28:18 Rereading configuration. ] |
| 3 | | [ Nov 4 06:28:20 Rereading configuration. ] |
| 4 | | [ Nov 4 06:28:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-11-04T06:28:24.376Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService20
|
| 7 | 2026-11-04T06:28:24.386Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService20
|
| 8 | 2026-11-04T06:28:24.393Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-11-04T06:28:24.397Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-11-04T06:28:24.403Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService20"
static address = fd00:1122:3344:101::19
|
| 11 | 2026-11-04T06:28:24.858Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-11-04T06:28:24.862Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_e2106fbd-b485-4d55-818f-fa6b7a0d7b1c"
|
| 13 | | [ Nov 4 06:28:24 Method "start" exited with status 0. ] |