[ Nov  5 22:10:03 Enabled. ]
[ Nov  5 22:10:03 Rereading configuration. ]
[ Nov  5 22:10:04 Rereading configuration. ]
[ Nov  5 22:10:08 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService24 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.195940655Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761,"datalink":"oxControlService24"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.208912856Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761,"datalink":"oxControlService24"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.221749696Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.227559253Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.233320819Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService24\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.691009209Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-05T22:10:08.699626769Z","hostname":"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14","pid":23761,"zonename":"\"oxz_crucible_7ca32772-fde1-4461-9bed-34cc610c1b14\""}
[ Nov  5 22:10:08 Method "start" exited with status 0. ]