[ Nov  6 01:00:34 Enabled. ]
[ Nov  6 01:00:34 Rereading configuration. ]
[ Nov  6 01:00:36 Rereading configuration. ]
[ Nov  6 01:00:40 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService27 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:40.953332331Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174,"datalink":"oxControlService27"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:40.964228921Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174,"datalink":"oxControlService27"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:40.975318617Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:40.980515323Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:40.984788328Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService27\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:41.442664916Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:41.449926702Z","hostname":"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89","pid":28174,"zonename":"\"oxz_oximeter_8a547420-cdf8-412a-8fb9-af9aa95d5c89\""}
[ Nov  6 01:00:41 Method "start" exited with status 0. ]