[ Nov  6 01:00:32 Enabled. ]
[ Nov  6 01:00:32 Rereading configuration. ]
[ Nov  6 01:00:34 Rereading configuration. ]
[ Nov  6 01:00:39 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.376102021Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.386045108Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.395681295Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.400977514Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.406387648Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.864154793Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-11-06T01:00:39.873391686Z","hostname":"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d","pid":27609,"zonename":"\"oxz_crucible_5bc2c7ca-8408-4b0f-9f5f-ca7df7636e7d\""}
[ Nov  6 01:00:39 Method "start" exited with status 0. ]